Skip navigation and jump to the content

Products

H&K Behälter- und Edelstahltechnik GmbH
The experts for individual tanks and special designs.

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

Dissolving plant AB-10000 with powder suction system EML

Project information

Dimensions: The equipment consists of a tank with a capacity of 10,000 l (Ø 1,800mm, total height 5,500mm) with two welded-in baffles with a width of 140mm and 55mm distance from the wall. The tank is insulated in the bottom and jacket area and is placed in a base rack with drain tray. All fittings as well as measuring and control technology have been tubed within the base rack.

Materials:

  1. Base rack and drain tray made of St 37
  2. primed with zinc phosphate 60μ and double top coat with 80μ each in RAL 7035
  3. Parts in contact with the product of both tank and piping made of 1.4571, outer parts made of 1.4301 or 1.4541
  4. respectively; Insulation material: mineral wool
  5. Insulation coating made of 1.4301

Surface treatment:

  1. Inner and outer surfaces of the tank pickled and passivated
  2. Outer surface of insulation pickled and passivated using the spray coat method
  3. Piping parts pickled and passivated as well

Operating data:

  1. The tank is designed for a maximum operating pressure of -0/ 0.1 bar in the interior at 100 °C max.
  2. Acceptance by manufacturer

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

Membrane filtration plant

Project information

Dimensions: Equipment consisting of a base frame 6,400mm×1,200mm for installing the components that have been provided by the customer in this particular case. The piping, partly made of PP by a partner, partly made of Hastelloy 2.4605 by H&K, has been executed at our premises.

Materials:

  1. Base frame with wire trays made of 1.4301
  2. Piping in DN 20/ DN 25 made of Hastelloy 2.4605

Surface treatment:

  1. Base frame and Hastelloy piping pickled and passivated

Operating data:

  1. Hastelloy piping designed for a maximum operating pressure of 25 bars at 65 °C.
  2. PP piping designed for a maximum operating pressure of 2 bars at 65 °C.

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

2 cabin housings in base frame

Project information

Dimensions: cabin housing/tank: Ø 2,100mm, cylindrical height 2,100mm. At the bottom and at the top with torospherical head, laterally in the jacket with two opposing rectangular orifices with a width of 1,580mm each. Sheet thickness: 3mm on all sides, Border circumferentially edged. Base frame 2,400mm×2,400mm×3,280mm in height made of square tubes 80mm×80mm×3 mm.

Materials:

  1. Tank made of 1.4571
  2. Base frame made of 1.4301

Surface treatment:

  1. Surfaces IIIc, inner welding seams ground flush with the sheet surface
  2. Inner and outer surfaces pickled and passivated

Operating data:

  1. Designed for pressureless operation

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

New pipework

Project information

New pipework for an existing series of battery tanks on site. Tube diameter 42.4mm×1.6mm and 33.7mm×1.6mm. Including distribution and pump stations with corresponding fittings. Dismantling of the old pipework and installation of the new pipework could be executed during running operations thanks to optimum planning and preparation.

Materials:

  1. Completely made of 1.4301

Surface treatment:

  1. Formed inside, brushed outside

Operating data:

  1. Designed for pressureless operation

What's Next?

We roused your interest and you need an individual information or an expert advice. Call us now on + 49 78 51 70 89 68 – 0 .
Or contact us via skype on: status

For a request without obligation download our request template here.