Skip navigation and jump to the content

Products

H&K Behälter- und Edelstahltechnik GmbH
The experts for individual tanks and special designs.

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

Rectification column for extraction of drinking alcohol

Project information

Dimensions: Ø 900mm, total height 31m. At the bottom and at the top with torospherical head according to DIN 28011. Column divided in three parts by means of two flange connections. In the interior with 75 bearing rings made of flat 40×6mm, rounded up and welded-in one-sided. Bearing rings approx. ¾ circumferential and without borings. On the ends with alternately welded-in vertical terminal strips 100×6mm.

Materials:

  1. Parts in contact with the product made of stainless steel 1.4301/1.4541
  2. Flange sealing’s made of Gylon blue
  3. Screws made of A2/A4

Surface treatment:

  1. Inner and outer surfaces completely pickled and passivated

Operating data:

  1. The column is designed for a maximum operating pressure of -1/5 bars at 160 °C max.
  2. Acceptance according to PED (Pressure Equipment Directive) 97/23/EG, category IV, module G with 12 bar water pressure test

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

Filter housing made of Al 99.5

Project information

Dimensions: Ø 2,600mm, total height 6,686mm, at the bottom with 60° conical bottom, at the top with flanged-on torospherical head. In the interior with welded-in filter bottom reinforced on the bottom side with 102 borings Ø 122mm. Including complete pressurised air distribution with nine bored tubes DN 50.

Materials:

  1. Completely made of Al 99,5
  2. Screws made of V4A

Surface treatment:

  1. Inner and outer surfaces pickled and passivated

Operating data:

  1. The tank is designed for a maximum operating pressure of -0,035/ 0,035 bar at 200 °C
  2. Acceptance by manufacturer

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

Separator DN 3800

Project information

Dimensions: Ø 3,800mm, total height 7,750mm. At the bottom and at the top with welded-on torospherical head, at the bottom with skirt support and ground-level ring made of flat profile. Riser DN 1500 fastened in the separator with star-shaped arranged sheets. With three circumferential vacuum backing rings. Laterally with two tangential nozzles with Ø 1,320mm. The separator is completely insulated and coated with riveted stainless steel plates.

Materials:

  1. Parts in contact with the product made of stainless steel 1.4571, skirt support and reinforcement ring made of 1.4301
  2. Insulation material: mineral wool (insulation thickness 90mm)

Surface treatment:

  1. Inner and outer surfaces pickled and passivated

Operating data:

  1. The separator is designed for a maximum operating pressure of -1/ 0.5 bar at 110 °C max.
  2. Acceptance by manufacturer

What's Next?

We roused your interest and you need an individual information or an expert advice. Call us now on + 49 78 51 70 89 68 – 0 .
Or contact us via skype on: status

For a request without obligation download our request template here.